Buprenorphine-Test.com

by TransmetronDrugTest.com

Urine Drug Test

 

Types Of Drug Tests

 

Drug Testing Information

 

Drug Test By Drug

Drug Information

Other Urine Tests

 

Drug Testing Supplies

 

_______________

 

?  ? Questions ? ?

 

Give us a call.  Friendly professionals ready to answer your call at:

 

801-596-2709

_______________

 

Contact Us

Copyright © 2014 Transmetron

 

Buprenorphine Drug Test - Suboxone Test - Suboxone Drug Testing

This Buprenorphine drug test will detect use of Suboxone®, Subutex® or Buprenex® (buprenorphine hydrochloride).  This is a Suboxone drug test, which detects the drug Buprenorphine - Suboxone detection in urine.  

Buprenorphine is a potent analgesic often used in the treatment of opioid addiction.  The Buprenorphine drug is sold under the trade names Subutex™, Buprenex™, Temgesic™ and Suboxone™, which contain Buprenorphine HCl alone or in combination with Naloxone HCl. 

Similar to opiates such as Methadone, Subutex® and Suboxone® are designed as a replacement for injected and snorted opiates such as heroin.  Buprenorphine, a derivative of thebaine, provides pain relief and also produces a narcotic high. In fact, Buprenorphine was originally used for pain relief purposes over many years ago.

Substitution treatment is a form of medical care offered to opiate addicts (primarily heroin addicts) based on a similar or identical substance to the drug normally used.  In substitution therapy, Buprenorphine is as effective as Methadone but demonstrates a lower level of physical dependence. Concentrations of free Buprenorphine and Norbuprenorphine in urine may be less than 1 ng/ml after therapeutic administration, but can range up to 20 ng/ml in abuse situations.¹ The plasma half life of Buprenorphine is 2-4 hours.¹ While complete elimination of a single dose of the drug can take as long as 6 days, the window of detection for the parent drug in urine (Suboxone detection in urine) is thought to be approximately 3 days.

Substantial abuse of Buprenorphine has also been reported in many countries where various forms of the drug are available.  The drug has been diverted from legitimate channels through theft, doctor shopping, and fraudulent prescriptions, and been abused via intravenous, sublingual, intranasal and inhalation routes.

 

The One Step Buprenorphine Drug Test Device is a rapid urine-screening test that can be performed without the use of an instrument. The test utilizes a monoclonal antibody to selectively detect elevated levels of Buprenorphine in urine. The One Step Buprenorphine Test Device yields a positive result when the Buprenorphine in urine exceeds 10 ng/ml.


1 Panel Buprenorphine Drug Test Dip - Suboxone Test

Description

 

Innovacon Suboxone Drug Test - is a one step lateral flow chromatographic immunoassay for the detection of Buprenorphine in human urine at a cut off concentration of 10 ng/mL. FDA Cleared and CLIA Classified as Moderately Complex. (FDA 510K#: K060466).  This Suboxone test detects Buprenorphine and metabolites, norbuprenorphine, and Buprenorphine-3- β. -D–Glucuronide.  This test is for Subox


#DIP-BUP - Buprenorphine Drug Test Dip

RETAIL $9.95.  OUR PRICE $2.95

LOW Price Guarantee!     CALL for BULK Pricing > > > > 801-596-2709

 

Other Single Panel Drug Test Dips
Description

#DIP-AMP - Amphetamine
#DIP-BAR - Barbiturates
#DIP-BZO - Benzodiazepines
#DIP-COC - Cocaine
#DIP-mAMP - Methamphetamines
#DIP-MDMA - Ecstasy
#DIP-MTD - Methadone
#DIP-OPI - Opiates
#DIP-OXY - Oxycodone
#DIP-PCP - Phencyclidine

RETAIL $9.95.  OUR PRICE $2.95

LOW Price Guarantee!     CALL for BULK Pricing > > > > 801-596-2709

Please note, we also offer Buprenorphine LCMS

Click here for Multi-Panel Drug Tests (to test for 2 to 12 drugs in one test).

 

A rapid, one step test for the qualitative detection of Buprenorphine in human urine.  For healthcare professionals including professionals at point of care sites. For in vitro diagnostic use only.

INTENDED USE

The One Step Buprenorphine Test Device is a lateral flow chromatographic immunoassay for the detection of Buprenorphine in human urine at a level relative to the Buprenorphine cut-off concentration of 10 ng/mL.  This assay is intended for use by professionals to assist in the determination of drug compliance.

This assay provides only a preliminary analytical test result. A more specific alternate chemical method must be used in order to obtain a confirmed analytical result. Gas chromatography/mass spectrometry (GC/MS) or Liquid chromatography/mass spectrometry (LC/MS) are the preferred confirmatory methods. Clinical consideration and professional judgment should be applied to any drug of abuse test result, particularly when preliminary positive results are used.

PRINCIPLE

The One Step Buprenorphine Test Device is an immunoassay based on the principle of competitive binding. Drugs that may be present in the urine specimen compete against the drug conjugate for binding sites on the antibody.

During testing, a urine specimen migrates upward by capillary action. Buprenorphine, if present in the urine specimen below 10 ng/mL, will not saturate the binding sites of antibody-coated particles in the test device. The antibody-coated particles will then be captured by immobilized Buprenorphine conjugate and a visible colored line will show up in the test region. The colored line will not form in the test region if the Buprenorphine level exceeds 10 ng/mL because it will saturate all the binding sites of anti-Buprenorphine antibodies. A drug-positive urine specimen will not generate a colored line in the test region because of drug competition, while a drug-negative urine specimen or a specimen containing a drug concentration lower than the cut-off will generate a line in the test region. To serve as a procedural control, a colored line will always appear in the control region, indicating that proper volume of specimen has been added and membrane wicking has occurred.

REAGENTS

The test device contains mouse monoclonal anti-Buprenorphine antibody-coupled particles and Buprenorphine-protein conjugate. A goat antibody is employed in the control line system.

PRECAUTIONS

·      For healthcare professionals including professionals at point of care sites.

·      For in vitro diagnostic use only. Do not use after the expiration date.

·      The test device should remain in the sealed pouch until use.

·      All specimens should be considered potentially hazardous and handled in the same manner as an infectious agent.

·      The used test device should be discarded according to federal, state and local regulations.  

STORAGE AND STABILITY

Store as packaged in the sealed pouch at 2-30°C. The test device is stable through the expiration date printed on the sealed pouch. The test device must remain in the sealed pouch until use. DO NOT FREEZE. Do not use beyond the expiration date. 

SPECIMEN COLLECTION AND PREPARATION

Urine Assay

The urine specimen must be collected in a clean and dry container. Urine collected at any time of the day may be used. Urine specimens exhibiting visible precipitates should be centrifuged, filtered, or allowed settle to obtain a clear specimen for testing.

Specimen Storage

Urine specimens may be stored at 2-8°C for up to 96 hours prior to assay. For prolonged storage, specimens may be frozen and stored below -20°C. Frozen specimens should be thawed and mixed before testing.

 MATERIALS

Materials Provided

·      Test devices

·      Disposable specimen droppers

·      Package insert

Materials Required But Not Provided

·      Specimen collection container

·      Timer

·      External controls

DIRECTIONS FOR USE

Allow test device, urine specimen, and/or controls to reach room temperature (15-30°C) prior to testing. 

1.                  Bring the pouch to room temperature before opening it. Remove the test device from the sealed pouch and use it as soon as possible.

2.                  Place the test device on a clean and level surface. Hold the dropper vertically and transfer 3 full drops of urine (approx. 100 µL) to the specimen well (S) of the test device, and then start the timer. Avoid trapping air bubbles in the specimen well (S). See the illustration below.

3.                  Wait for the colored line(s) to appear. The result should be read at 5 minutes. Do not interpret the result after 10 minutes.

Test Results

 

INTERPRETATION OF RESULTS

(Please refer to the illustration above)

NEGATIVE:* Two lines appear. One colored line should be in the control region (C), and another apparent colored line should be in the test region (T). This negative result indicates that the Buprenorphine concentration is below the detectable level (10 ng/mL).

* NOTE:  The shade of color in the test region (T) will vary, but it should be considered negative whenever there is even a faint colored line.

POSITIVE: One colored line appears in the control region (C). No line appears in the test region (T). This positive result indicates that the Buprenorphine concentration exceeds the detectable level (10 ng/mL).

INVALID: Control line fails to appear. Insufficient specimen volume or incorrect procedural techniques are the most likely reasons for control line failure. Review the procedure and repeat the test using a new test device. If the problem persists, discontinue using the lot immediately and contact the manufacturer.

 

QUALITY CONTROL

A procedural control is included in the test.  A colored line appearing in the control region (C) is considered an internal positive procedural control. It confirms sufficient specimen volume, adequate membrane wicking and correct procedural technique.

Control standards are not supplied with this kit; however it is recommended that positive and negative controls be tested as good laboratory practice to confirm the test procedure and to verify proper test performance.

 

LIMITATONS

1.      The One Step Buprenorphine Test Device provides only a qualitative, preliminary analytical result. A secondary analytical method must be used to obtain a confirmed result. Gas chromatography/mass spectrometry (GC/MS) or Liquid chromatography/mass spectrometry (LC/MS) are the preferred methods.²

2.      It is possible that technical or procedural errors, as well as other interfering substances in the urine specimen may cause erroneous results.

3.      Adulterants, such as bleach and/or alum, in urine specimens may produce erroneous results regardless of the analytical method used. If adulteration is suspected, the test should be repeated with another urine specimen.

4.      A positive result indicates presence of the drug but does not indicate level or intoxication, administration route or concentration in urine.

5.      A negative result may not necessarily indicate drug-free urine. Negative results can be obtained when drug is present but below the cut-off level of the test.

6.      This test does not distinguish between drugs of abuse and certain medications.

 

PERFORMANCE CHARACTERISTICS

Accuracy

226 urine samples were obtained and tested with the BUP One Step Buprenorphine Test Device and by LC/MS.  The results are summarized below:

Specimen Cut-off Range by LC/MS

 

 

 

Negative*

< -25% of Cut-off

-25% Cut-off to Cut-off

Cut-off to+25% ofCut-off

>+25% ofCut-off

% Agreement

BUP Device

Positive

0

0

0

5

50

98% (55/56) (90%-99%)**

Negative

150

15

5

1

0

>99% (170/170) (98%-100%)**

Total agreement with LC/MS: 225/226 = 99% (98%-99%)**

* Negative samples were confirmed negative using LC/MS by pooling these samples into groups of 15.

** Denotes 95% confidence interval

Effect of Urinary Specific Gravity

Fifteen (15) urine samples with specific Gravity ranging from 1.004 to 1.034 were spiked with Buprenorphine to the concentrations of 5 ng/mL, 15 ng/mL and 20 ng/mL. The One Step Buprenorphine Test Device was tested in duplicate using the fifteen neat and spiked urine samples. The results demonstrate that varying ranges of urinary specific gravity do not affect the test results.

Effect of Urinary pH

The pH of an aliquoted negative urine pool was adjusted to a pH range of 5 to 9 in1 pH unit increments and spiked with Buprenorphine to 5 ng/mL, 15 ng/mL and 20 ng/mL.  The spiked, pH-adjusted urine was tested with the One Step Buprenorphine Test Device in duplicate. The results demonstrate that varying ranges of pH do not interfere with the performance of the test.

Cross-Reactivity

A study was conducted to determine the cross-reactivity of the test with compounds in either drug-free urine or Buprenorphine positive urine. The following compounds show no cross-reactivity when tested with the One Step Buprenorphine Test Device at a concentration of 100 µg/mL.


? ? ?  Questions  ? ? ?

Give Us A Call:  (801) 596-2709

 

Important Links:


Super Special Deals
For more details click HERE


Transmetron offers only the highest quality, instant drug test kits and supplies. Our tests are the same tests used by hospitals and clinics. Each test is FDA approved, easy to use and easy to read. We offer instant drug test dips, cassettes ( devices ), saliva drug tests, integrated drug test cups, breath alcohol and saliva alcohol tests. Our urine drug screen test kits can test for the following drugs: amphetamine ( AMP ), barbiturates, benzodiazepines ( BZO ), cocaine ( COC ), marijuana ( THC ), methadone ( MTD ), methamphetamine ( mAMP ) - meth, methylenedioxymethamphetamine ( MDMA ), morphine, opiate, opiates, phencyclidine ( PCP ), and tricyclic antidepressants ( TCA ). When you need to know, TRANSMETRON is the way to go!